Click to expand
DSI Austria  ›  Products  ›  Stay Cable Systems  ›  DYNA Grip® Stay Cable System
DYNA Grip® Stay Cable System

DYNA Grip® Stay Cable System

The DYNA Grip® Stressing Anchorage consists of an anchor block in which the strands are anchored by high fatigue 3 part-wedges. A ring nut is threaded onto the anchor block to transmit the cable force into the structure via the bearing plate. A steel pipe which incorporates bending and sealing provisions for the strands is part of the anchor block. A non-adjustable anchorage with the same provisions for bending and sealing of the strands can be placed at the dead-end side:

DYNA Grip® Stay Cable System

DSI - DYNA Grip® Stay Cable System

1 - Replaceability
Exchange of single strands including PE-coating through anchorage ⇒ no interruption of traffic

5 - Compaction Clamp
With long length and inner radius for optimized cable bending and minimized transverse pressure. Also serves as supporting structure in case a guide deviator or damper is installed

2 - Leak Tightness
Gap between threads is filled with corrosion protection compound for improved tightness


6 - Protection against Impact
Usually used for vandalism protection. Can also be upgraded with blast and fire protection

3 - High Fatigue Capacity
Compliance with international fib and PTI standards

7 - Free Length
Strands additionally protected by UV-resistant stay pipe. Outer helical fillet for reducing wind-rain induced vibrations

4 - Excellent Durability
A watertight and adjustable sealing unit and strands with PE-sheathing up to the wedge meet highest demands.
No deviation of strands in the wedge gripping zone


For more details, please have a look at the DYWIDAG Multistrand Stay Cable Systems brochure displayed in the download box in the left-hand menu of this page.

dsi map overlay